Effect of morphologies of martensite–austenite constituents on impact toughness in intercritically reheated coarse-grained heat-affected zone of HSLA steel X Luo, X Chen, T Wang, S Pan, Z Wang Materials Science and Engineering: A 710, 192-199, 2018 | 131 | 2018 |
On the texture evolution of Mg–Zn–Ca alloy with different hot rolling paths Q Li, GJ Huang, XD Huang, SW Pan, CL Tan, Q Liu Journal of Magnesium and Alloys 5 (2), 166-172, 2017 | 47 | 2017 |
Tailoring the texture and mechanical anisotropy of a Mg–2Zn–2Gd plate by varying the rolling path S Pan, Y Xin, G Huang, Q Li, F Guo, Q Liu Materials Science and Engineering: A 653, 93-98, 2016 | 43 | 2016 |
Micro-alloying effect of Er and Zr on microstructural evolution and yield strength of Al-3Cu (wt.%) binary alloys S Pan, X Chen, X Zhou, Z Wang, K Chen, Y Cao, F Lu, S Li Materials Science and Engineering: A 790, 139391, 2020 | 29 | 2020 |
Synergistic strengthening by nano-sized α-Al (Mn, Fe) Si and Al3Zr dispersoids in a heat-resistant Al–Mn–Fe–Si–Zr alloy S Pan, F Qian, C Li, Z Wang, Y Li Materials Science and Engineering: A 819, 141460, 2021 | 24 | 2021 |
On the texture memory effect of a cross-rolled Mg-2Zn-2Gd plate after unidirectional rolling P Zhang, Y Xin, L Zhang, S Pan, Q Liu Journal of Materials Science & Technology 41, 98-104, 2020 | 23 | 2020 |
The effect of hot rolling regime on texture and mechanical properties of an as-cast Mg–2Zn–2Gd plate S Pan, X Huang, Y Xin, G Huang, Q Li, C Tan, Q Liu Materials Science and Engineering: A 731, 288-295, 2018 | 23 | 2018 |
Synergistic influence of La and Zr on microstructure and mechanical performance of an Al-Si-Mg alloy at casting state Y Cao, X Chen, Z Wang, K Chen, S Pan, Y Zhu, Y Wang Journal of Alloys and Compounds 902, 163829, 2022 | 20 | 2022 |
Effect of Cd micro-addition on microstructure and mechanical properties in ternary Al-Si-Cu alloy Y Cao, X Chen, Z Wang, K Chen, W Tang, S Pan, X Yang, J Qin, S Li, ... Journal of Alloys and Compounds 851, 156739, 2021 | 19 | 2021 |
In situ observations of crack propagation in as-cast Cu-1.5 Fe-0.5 Co (wt%) alloy K Chen, S Pan, Y Zhu, Y Cheng, X Chen, Z Wang Materials Science and Engineering: A 706, 211-216, 2017 | 19 | 2017 |
Optimisation of deformation properties in as-cast copper by microstructural engineering. Part II. Mechanical properties K Chen, S Pan, X Chen, Z Wang, R Sandström Journal of Alloys and Compounds 812, 151910, 2020 | 14 | 2020 |
In-situ nanoparticles: a new strengthening method for metallic structural material S Pan, X Zhou, K Chen, M Yang, Y Cao, X Chen, Z Wang Applied Sciences 8 (12), 2479, 2018 | 11 | 2018 |
Achieving superior dispersion-strengthening effect in an AA5xxx Al-Mg-Mn alloy by mico-alloying S Pan, Z Wang, C Li, D Wan, X Chen, K Chen, Y Li Materials & Design 226, 111647, 2023 | 10 | 2023 |
Diffusion controlled early-stage L12-D023 transitions within Al3Zr S Pan, C Li, F Qian, L Hao, Y Li Scripta Materialia 231, 115460, 2023 | 6 | 2023 |
Microstructure and mechanical properties of ultralow carbon high-strength steel weld metals with or without Cu-Nb addition X Yang, X Chen, S Pan, Z Wang, K Chen, D Li, J Qin International Journal of Minerals, Metallurgy and Materials 28, 120-130, 2021 | 5 | 2021 |
Fabrication Techniques and the Formation Mechanism of Nanoparticles and Nanoclusters in Metal Materials J Qin, X Chen, Y Wang, Y Zhu, S Pan, W Zhou, M Chen, Z Wang Metals 12 (9), 1420, 2022 | 2 | 2022 |
Improving microstructure and deformation surface quality of novel Al-Mg-Zn-Zr alloy by varying homogenization regimes J Li, F Qian, S Pan, F Zhang, C Guo, S Xu, M Liu, X Cheng Journal of Materials Science & Technology 185, 121-132, 2024 | 1 | 2024 |
Effect of composition on microstructure and properties of as-cast 2196 Al–Cu–Li alloy K Chen, Z Li, Y Cao, X Wu, X Chen, Z Wang, Y Tian, S Pan Materials Science and Technology 38 (15), 1168-1184, 2022 | 1 | 2022 |
纳米弥散相在含锆铝合金中的析出行为与强化机制 潘士伟 北京科技大学, 2021 | 1 | 2021 |
Directed energy deposition of Al-Mg-Si alloys with fully-equiaxed microstructure and isotropic high strength/ductility W Li, S Pan, Y Zhu, F Qian, Y Liang, S Xu, X Cheng Additive Manufacturing, 104020, 2024 | | 2024 |